Cortex Screw 2.7 mm
Thread diameter: 2.7mm
Drill bit for threaded hole: 2.0mm
Drill bit for gliding hole: 2.7mm
Core diameter: 1.9mm
Head diameter: 5.0mm
Hexagonal socket width: 2.5mm..
$0.00
Ex Tax:$0.00
Cancellous Bone Screw 3.5mm fully threaded
Thread diameter: 6.5mm
Thread length: 16mm
Drill bit for threaded hole: 3.2mm
Shaft diameter: 4.5mm
Drill bit for shaft, optional: 4.5mm
Core diameter: 3.0mm
Head diameter: 8.0mm
Hexagonal So..
$0.00
Ex Tax:$0.00
Cannulated Screw 4.5mm full threaded, self tapping, self drilling
Thread diameter: 4.5mm
Drill bit for threaded hole: 3.2mm
Shaft diameter: 3.1mm
Core diameter: 2.7mm
Head diameter: 6.5mm
Hexagonal Socket width : 3.5mm
Cannulation : 1.7mm..
$0.00
Ex Tax:$0.00
DCP 4.5mm, narrow
Fixation with 4.5 and 6.0mm screws.
All plate holes are designed as self-compressing holes.
All end holes are designed for cancellous bone screws.
Profile
Thickness : 3.6mm
Width : 12.0mm
Hole Spacing : 16.0mm and 25.0mm..
$0.00
Ex Tax:$0.00
LC-DCP 4.5mm, narrow
Fixation with 4.5 and 6.5mm screws.
The LC-DCP holes allow compression on both sides of the longitudinal axis.
The end holes are suitable for cancellous bone screws.
Under cuts for reduced vascular damage...
$0.00
Ex Tax:$0.00
One Third Tubular Plate 3.5mm
Thickness : 1.0mm
Width : 9.0mm
Hole Spacing : 12.0mm and 16.0mm
One Third Tube : 12.0mm dia.
..
$0.00
Ex Tax:$0.00
LCP 4.5mm, narrow
Thickness : 3.6mm
Width : 12.0mm
Hole Spacing : 16.0mm and 25.0mm
..
$0.00
Ex Tax:$0.00
Lengthening Plate 4.5mm, broad 8 holes
Fixation with cortex screws 4.5mm
Cancellous bone screw may also be used in the end holes.
For osteosynthesis after osteotomy for lengthening
Profile
Thickness : 4.5mm
Width : 16.0mm
Hole Spacing : ..
$0.00
Ex Tax:$0.00
T-Plate 3.5mm, right angled
For the left and right radius.
Fixation with 3.5 and 4.0mm screws.
Shaft Profile
Thickness : 1.2mm
Width : 10.0mm ..
$0.00
Ex Tax:$0.00
DCS Plate 95
Profile
Thickness : 5.4 mm
Width : 16.0 mm
Hole Spacing : 16.0 mm
Outer Barrel Diameter : 12.5 mm..
$0.00
Ex Tax:$0.00